American Circuits is located in Charlotte, North Carolina. We operate out of two buildings totaling 27,000sq.ft. Our primary building, where we perform bare board manufacture and thru-hole board assembly, as well as the location for our engineering department and corporate office is 513 West 24th Street. Our second building, dedicated to surface mount board assembly, is located at 3525 Latrobe Drive. We are open from 7:30 a.m. To 4:30 p.m. EST, M-F.
American Circuits offers a complete Printed Circuit Design (PCB Designing) Service for our customers. This service is utilized by customers in several forms. Most commonly, a customer will have a schematic for their design and need the PCB laid out from that schematic. Our service is fast and professional. We work closely with you, the customer, to get all the information we need to lay out your board properly.
For customers who may have an old bare board laying around, but don’t have the engineering files needed to reproduce it, ACI can also use an existing printed circuit board to create your design. We use a calibrated scanner capable of scanning bare boards directly into layout software. This process has the capability of scanning circuits under dark Solder Mask, even black, so Solder Mask is not a problem. This procedure is also used during our Reverse Engineering Service.
We can even make your circuit directly from a breadboard. Especially on prototypes, sometimes this is the most cost effective way to produce your product. If you need a free breadboard for your next project, give us a call. We’ll be glad to provide one.
No matter which design service your particular project requires, we will be there for you throughout the process. We’re not happy until you’re happy.
OR
Already have an account?Click Here
