more
PREV 19 March, 2026 NEXT

PCB Equipment Digest: New and Interesting Products

19 March, 2026 Newsletter - PCB Directory

New and Interesting PCB Products. View it in your browser

New Products Directory News. Whitepapers Articles Calculators Events Webinars
 
Equipment Digest
Date: 19 March, 2026
 
Sponsored by electronica India 2026
 
 
New and Interesting Products
Automated Optical Inspection (AOI) Equipment
3D AOI Equipment with SPI & CMM Multi-Process Capabilities
Automated Optical Inspection (AOI) Equipment  from Nordson Corporation
The SQ5000Pro from Nordson is a 3D Automated Optical Inspection (AOI) Equipment that covers inspection and measurement for AOI, SPI, and CMM applications. It uses Multi-Reflection Suppression® (MRS®) technology sensors that meticulously identify and reject reflections caused by shiny components. This equipment has a resolution of sub-10 μm and has a FOV of 50 x 50 mm.
Download Brochure Product Details
X-ray Inspection Equipment
3D AXI System for SMT PCB Assembly Inspection
X-ray Inspection Equipment  from ViTrox Corporation Berhad
The V810Ai S3 from ViTrox is a 3D AXI System that uses an AXI Dual Lane system for high throughput and cycle time enhancement. It is AI-integrated to automate the process for enhanced accuracy and efficiency, and has powerful & robust AI test algorithms with comprehensive test component coverage for complicated inspection processes.
Download Brochure Product Details
Flying Probe Tester
Flying Probe Tester with up to 22 Interchangeable Probes
Flying Probe Tester  from Acculogic Inc
The FLS 980Dxi from Acculogic is a Flying Probe Tester that has up to 22 interchangeable probe modules (top and bottom), double-sided probing, allowing simultaneous testing of both sides. It supports Standard Needle, Fine Pitch, Very Fine Pitch, Round, Cup, Chisel, Trident, etc. probe tips and can carry more than 2 types of tips on flying probes. It can accommodate PCB sizes up to 634 x 990 mm and PCB thicknesses up to 12 mm.
Download Brochure Product Details
X-ray Inspection Equipment
X-ray Inspection Equipment based on 3D CT Scan Technology
X-ray Inspection Equipment  from Omron Corporation
The VT-X750 CT from Omron Corporation is an X-ray Inspection Equipment that uses volumetric X-Ray imaging based on 3D CT scan technology. This technology cuts hidden solder joints into hundreds of cross-section slices within a matter of seconds to isolate individual layers. It has automated inspection algorithms to measure a variety of features without the shadowing or interference of components on the opposite side (including Head-in-Pillow and voiding defects).
Download Brochure Product Details
Sponsored by electronica India 2026
electronica India 2026
Visit India’s Powerplay in Electronics
Engage with leading suppliers at electronica India 2026 and explore the latest industry innovations while building meaningful connections with industry leaders and government representatives. Gain valuable insights through expert-led conferences and curated events. Click here to learn more.
Solder Paste
No-Clean, Silver-Free Solder Paste for SMT Applications
Solder Paste  from MacDermid Alpha Electronics Solutions
The ALPHA OM-100 SnCX 07 from MacDermid Alpha is a No-Clean, Silver-Free Solder Paste engineered for surface mount technology (SMT) assembly. It offers a balance of reliable joint performance and cost efficiency across a wide range of applications, including white goods and smart electronics. This solder paste delivers strong mechanical and thermal reliability with excellent print performance and wide processability.
Download Brochure Product Details
Buffer Equipment
Vertical FIFO/LIFO Buffering System for PCB Sizes from 50 x 50 mm to 400 x 350 mm
Buffer Equipment  from Manncorp
The HB350W-ST from Manncorp is a Vertical Buffering System for PCB sizes ranging from 50 x 50 mm to 400 x 350 mm (350 mm width also available) and a capacity of 24 pieces. It is designed to access its built-in memory to release stored PCBs in either first-in first-out (FIFO) or last-in first-out (LIFO) modes. This system also supports a pass-through function.
Download Brochure Product Details
Wave Soldering Equipment
Single Wave Soldering Machine for PCB Sizes of 200 x 290 mm
Wave Soldering Equipment  from DDM Novastar Inc
The Spartan 8S from DDM Novastar is a Single Wave Soldering Machine that supports PCB sizes of 200 x 290 mm. Engineered to provide an economical solution, this machine enables reduced labor costs for easy start-up of PCB production. It is equipped with dual preheaters, an on-board air compressor, fluxers, conveyor belt, wave and flux interval sensors, and interfaces.
Download Brochure Product Details
Solder Paste Printer
Solder Screen Printing Machine for PCB Sizes from 50 x 50 mm to 350 x 300 mm
Solder Paste Printer  from Panasonic Corporation
The NM-EJP9A from Panasonic Corporation is a Solder Screen Printing Machine designed for PCB sizes of 50 x 50 mm to 350 x 300 mm. It delivers high efficiency production across 2 lanes, while cutting down operational costs. Based on paperless cleaning technology, this machine reduces paper and solvent usage, thereby simplifying overall operation.
Download Brochure Product Details
Sponsored by electronica India 2026
 
 
In-Circuit Tester
Multi-Core Multi-Function Automatic In-Circuit Tester
In-Circuit Tester  from SPEA S.p.A.
The 3030IL from SPEA S.p.A. is an Automatic In-Circuit Tester that performs high-speed electrical testing of PCBs directly within an electronics production line. It can be equipped with up to 4 independent test cores, each one with an independent CPU, local memory, and instrumentation, able to test in parallel up to 4 boards/panels of boards. The system operates as a fully automated “bed-of-nails” tester and can be integrated into SMEMA-compatible assembly lines or used with automatic loaders and unloaders, enabling operator-free operation.
Download Brochure Product Details
PCB Curing Oven
UV Curing Oven for PCB Inks, Conformal Coatings and Adhesives
PCB Curing Oven  from ETS Energy Technology Systems, Inc
The FlexCure from ETS Energy Technology Systems, Inc. is a UV-curing oven that can cure inks, conformal coatings, and adhesives. It has a UV lamp of up to 6 kW in power that produces UVA & UVB light of intensity more than 500 mW/cm² and UVC light of intensity more than 100 mW/cm². This oven has a transfer speed of 50-600 cm/min with selectable transfer direction (R-L or L-R) and an adjustable width of 50-500 mm.
Download Brochure Product Details
Reflow Soldering Equipment
Reflow Soldering Oven with 8 Heating Zones
Reflow Soldering Equipment  from TAMURA Corporation
The TNV25-308EM from TAMURA Corporation is a Reflow Soldering Oven that has 8 heating zones, each 3 m in length. It can accommodate PCB sizes of 50 x 50 mm to 250 x 330 mm and component height ranging from 10-30 mm (upper/lower). This oven requires an AC supply of 200 V and consumes 78 A of current. It has a footprint of 1310 x 3060 x 1374 mm and is ideal for the soldering process (heating and cooling) of solder paste in SMT applications.
Download Brochure Product Details
Upcoming Event
Event Image
Focus on PCB 2026
Date: May 13-14, 2026
Location: Vicenza Expo Centre, Italy
Event Image
IEEE 76th Electronic Components and Technology Conference 2026
Date: May 26-29, 2026
Location: Orlando, Florida, United States
More Events
About PCB Directory
PCB Directory is the largest directory of PCB Manufacturers and Fabricators on Internet. We have listed the leading Printed Circuit Board manufacturers around the world and made them searchable by their location and their capabilities.
Selected Companies
Clear allX
Web Analytics