more
PREV 16 April, 2026 NEXT

PCB Equipment Digest: New and Interesting Products

16 April, 2026 Newsletter - PCB Directory

New and Interesting PCB Products. View it in your browser

New Products Directory News. Whitepapers Articles Calculators Events Webinars
 
Equipment Digest
Date: 16 April, 2026
 
Sponsored by PCB East 2026
 
 
New and Interesting Products
Automated Optical Inspection (AOI) Equipment
AOI Equipment for 2D/3D Inspection Applications
Automated Optical Inspection (AOI) Equipment  from Yamaha Motor Co., Ltd

The YRi-V TypeHS from Yamaha Motor Co., Ltd. is an AOI Equipment that has a 25 MP inspection head with 4-angle cameras and 8-way projection for 2D/3D inspection. It has a resolution of 5 or 7 μm and delivers an inspection speed of 16.2 cm²/s and 30.5 cm²/s, respectively. This equipment has four 20 MP high-resolution angle cameras, enabling accurate secondary judgment. It has an 8-way projector that reduces the number of blind spots for large components, realising high-accuracy 3D inspections of components with heights of up to 25 mm.
Download Brochure Product Details
Pick and Place Machine
Pick and Place Machine for Semiconductor and AI Datacenter Devices
Pick and Place Machine  from cohu

The Eclipse from cohu is a Pick and Place Machine that can handle the full spectrum of semiconductor devices, from analog ICs, mobile processors, to AI datacenter devices - including GPUs, CPUs, custom AI accelerators and ASIC processors. It has a placement rate of 12,000 UPH and can handle component sizes from 3 x 3 mm to 110 x 110 mm. This equipment has a single handler architecture that scales in power, force, thermal capability, and parallelism, supporting up to 16 placement heads.
Download Brochure Product Details
Rework Station
PCB Rework Station with Convection Oven and Dual-Station Architecture
Rework Station  from Manncorp

The 7750 Sniper III from Manncorp is a Rework Station that has a high-efficiency convection oven that provides fast, uniform heating with advanced PID control and Energy Reflow technology. It has a dual-station architecture: one station desolders defective parts, while the other places and reflows replacements. This rework station has micrometre controls for board alignment and an internal pump for component placement/pickup with support for automatic positioning by pneumatic control and vertical placement drive.
Download Brochure Product Details
X-ray Inspection Equipment
X-Ray Inspection Equipment for Reference Drilling on Multi-Layer PCBs
X-ray Inspection Equipment  from Mach3Lab

The Antares 700 X from Mach3Lab is an X-Ray Inspection Equipment that is designed to drill optimized reference holes and any other mechanical reference on multi-layer panels and inner layers. It has an X-ray source that produces a voltage of 50 KV and a CCD + Scintillator X-Ray sensor. This sensor has a field of view of 20 x 15 mm and a vision accuracy of ±4 μm with a scan area of 700 x 580 mm.
Download Brochure Product Details
Sponsored by PCB East 2026
PCB East 2026 in Worcester, MA: April 28 – May 1
PCB East 2026 in Worcester, MA: April 28 – May 1
PCB East is a premier regional event for printed circuit board design, fabrication, and assembly, featuring technical conference sessions and an exhibition on April 29 at the DCU Center, Worcester, MA. Click here to learn more.
Loader/Unloader
Loader/Unloader Equipment with Integrated Inspection Functions
Loader/Unloader  from JOT Automation

The 620 series from JOT Automation are Loader/Unloader Equipment that include segmented conveyors with integrated inspection. They can accommodate PCB lengths of 100-800 mm and widths of 50-620 mm with PCB components of heights ranging from 25-100 mm. Their conveyor speeds are adjustable between 6-12 m/min and track width adjustable by hand wheel.
Download Brochure Product Details
Solder Paste Printer
Fully Automatic Solder Screen Printing Machine for PCB Sizes from 100 x 65 mm to 1220 x 800 mm
Solder Paste Printer  from Juki Americas

The PMAXII from Juki Americas is a Fully Automatic Solder Screen Printing Machine supporting PCB sizes from 100 x 65 mm to 1220 x 800 mm. It is designed for manufacturers seeking to optimise productivity while consistently delivering high quality in their processes. It incorporates an advanced design that consists of a motorised, self-adjusting floating printing head, programmable squeegee pressure settings, a camera, 2D paste inspection, a stencil cleaner, and interfaces.
Download Brochure Product Details
Selective Soldering Machine
Selective Soldering Machine with Real-Time Solder Monitoring
Selective Soldering Machine  from Advanced Mechatronics Solutions, Inc

The Selective Soldering M/C from Advanced Mechatronics Solutions, Inc. is a Selective Soldering Machine that supports 3, 4, 5, 6, 8, 10, 12, or 15 mm soldering nozzles. It has a press plate, a jetting fluxer with 0.15 or 0.19 mm flux nozzles, flux volume control–flow sensor, IR Pre-heater and IR sensor. This equipment has a teaching camera and a real-time image camera for real-time solder monitoring.
Download Brochure Product Details
Buffer Equipment
LIFO/FIFO NG Buffer System for PCB Sizes from 50 x 50 mm to 440 x 330 mm
Buffer Equipment  from Advanced Mechatronics Solutions, Inc

The KGNB-700Y from Advanced Mechatronics Solutions is an NG Buffer System designed to store Not Good (NG) PCBs in a rack while transferring good PCBs to the next machine in FIFO or LIFO fashion. This unit is located after the SPI/AOI process and receives NG PCBs from the process, and upon inspection, the operator can change it to a good PCB. It consists of an upper conveyor belt for PCB transfer.
Download Brochure Product Details
Sponsored by PCB East 2026
 
 
Fume Extraction Equipment
Fume Extraction Equipment with HEPA Carbon Filters
Fume Extraction Equipment  from Donaldson BOFA

The AD 1500 iQ from Donaldson BOFA is a Fume Extraction Equipment that is designed for heavy-duty applications that produce considerable amounts of particulate. It has HEPA filters that are rated to filter 99.995% of particles at 0.3 microns and a secondary filter to remove fine particulate. This equipment has a DeepPleat DUO pre-filter with a large capacity drop-out chamber within the filter, which is designed to act as a pre-separator helping to extend the life of the pre-filter, which in turn protects against the premature blocking of the HEPA filter.
Download Brochure Product Details
PCB Prototyping Equipment
All-in-One Circuit Board Printing Machine for PCB Board Sizes of 125 x 125 mm
PCB Prototyping Equipment  from T-TECH, INC

The Quick Laser from T-TECH is an All-in-One Circuit Board Printing Machine that accommodates PCB board sizes of 125 x 125 mm. It is designed to eliminate PCB manufacturing lead times, allowing users to produce PCB boards in less than 4 hours. This printing machine is based on patent-pending Rapid Plate technology, which supports the creation of full copper vias without requiring micro-etch solution, graphite compounds, and electroless copper.
Download Brochure Product Details
Wave Soldering Equipment
Wave Soldering Equipment with 4 IR Preheating Zones
Wave Soldering Equipment  from Madell Technology Corporation

The MD-350PC from Madell Technology Corporation is a Wave Soldering Equipment that has 4 IR preheating zones. It has a heating zone of length 1800 mm and a preheating power of 12 kW. This equipment has a Titanium solder pot with computer-controlled temperature and a flux tank capacity of 5.2 L. It has a PCB conveyor with a speed of up to 2 m/min and can handle PCBs of a width of up to 350 mm.
Download Brochure Product Details
Upcoming Event
Event Image
Focus on PCB 2026
Date: May 13-14, 2026
Location: Vicenza Expo Centre, Italy
Event Image
PCB EAST 2026
Date: April 28 to May 1, 2026
Location: Worcester, United States
More Events
About PCB Directory
PCB Directory is the largest directory of PCB Manufacturers and Fabricators on Internet. We have listed the leading Printed Circuit Board manufacturers around the world and made them searchable by their location and their capabilities.
Selected Companies
Clear allX
Web Analytics